The Semi-Super Automated Clamp Carrier is the high production model of our most versatile line of clamp carriers. This machine has a Semi-Automatic Hydraulic Tightener(s) and Flattener System for the operator, and an Automatic Loosening System up above the work area.

Taylor #825A - Semi-Super Automated Clamp Carrier

Increase the Productivity over a Standard Semi-Auto Machine by up to 30%

Product Info


  • Produces up to 3000 ft2 / Shift
  • Standard Machine Features
    • Machine Frames Built to Match Product Dimensions
    • Taylor’s Patented Clamp Design in Lengths to Meet your Needs
    • Semi Automatic Clamp Tightener
    • Pneumatic Panel Flattener
    • Overhead Loosening System to Improve Cycle Time and Increase Production
    • Heavy Duty Motor Drive(s) for Rotation of the Sections
  • Pneumatic and Hydraulic Models Available
  • (1) Operator and (2) Operator Setups Available

Production is based on cycle time and panel size. Assuming that each section is curing 3 panels whose dimensions are 24″ x 24″ (60cm x 60cm) and assuming a cycle time of 1.5 minutes, production per shift equals:

One Panel:
=4 ft2 (.36M2)

One Section:
=12 ft2 (1.1M2)

One Cycle:
=1.5 minutes
=40 cycles/hour
=280 cycles/shift

Production output:
=12 ft2 x 280 cycles or 3360 ft2/shift
=1.1 M2 x 280 cycles or 308 M2/shift


If you have questions, or would like more information, please fill out our contact form.