Taylor #815 A /#80V - Semi Automatic Clamp Carrier
Designed for the shops who need to Produce up to 500 – 600 Panels per day
The Semi-Auto Clamp Carrier is our most versatile line of clamp carriers. Laminate Products such as Table Tops, Butcher Blocks, Stair Treads, Turnings, Mouldings, Cabinet Door Panels, Waste Recovery, Lumber Banding, and many more Applications.
Features:
- Produces up to 2500 ft2 / Shift
- Standard Machine Features
- Machine Frames Built to Match Product Dimensions
- Taylor’s Patented Clamp Design in Lengths to Meet your Needs
- Semi Automatic Clamp Tightener
- Pneumatic Panel Flattener
- Heavy Duty Motor Drive(s) for Rotation of the Sections
- Pneumatic and Hydraulic Models Available
- (1) Operator and (2) Operator Setups Available
As with all Taylor Clamp Carriers, smaller machines can be expanded as production requirements grow. The Classic Clamp Carrier is an ideal clamping system when a wide variety of products are to be glued.
Production is based on cycle time and panel size. Assuming that each section is curing 3 panels whose dimensions are 24″ x 24″ (60cm x 60cm) and assuming a cycle time of 2 minutes, production per shift equals:
One Panel:
=4 ft2 (.36M2)
One Section:
=12 ft2 (1.1M2)
One Cycle:
=2 minutes
=30 cycles/hour
=210 cycles/shift
Production output:
=12 ft2 x 210 cycles or 2520 ft2/shift
=1.1 M2 x 210 cycles or 231 M2/shift
