Striebig 4D

STRIEBIG 4D – space and time in perfect symbiosis

A STRIEBIG 4D is the tailor-made solution for your company and your requirements. Customising is the order of the day. The entire horizontal and vertical transport of the workpiece through the STRIEBIG 4D is fully automatic. The saw thus combines smooth cutting with effortless 1-man operation.

If you have questions, or would like more information, please fill out our contact form.

check out more striebig panel saws

Product Info

Highlights of the STRIEBIG 4D

The trilogy of efficient sawing

With the fully automatic panel lowering device PAV, the programmable panel feeder PPS and the equipment package STRIEBIG ExpertCut 4D, the STRIEBIG 4D offers unique equipment options.

PAV – the fully automatic panel lowering device

The fully automatic panel lowering device ensures that the panel material passes through the machine smoothly and vertically.

The PAV clamps are coated and designed for sensitive surfaces. The clamps hold panels weighing up to 130 kg per lowering device.

PPS – the fully automatic, programmable panel feeder

The fully automatic, programmable panel feeder ensures the horizontal transport of the workpiece.

The panel lies securely on the roller support. The panel feeder grips the panel with its special clamp and positions it with 0.1 mm precision. Done.

STRIEBIG ExpertCut 4D

With the equipment package STRIEBIG ExpertCut 4D, the STRIEBIG 4D offers intelligent and convenient cutting optimisation. The program facilitates an automatic cutting sequence with an optimum sawing procedure and the best possible material utilisation. This ensures consistency in the production process and allows the workpiece to be marked directly from the label printer.

LEARN MORE

Standard Equipment

Comprehensive standard equipment

12" touch screen computer with optimum operator guidance
Laser-supported display of the horizontal cut
Digital measuring system DMS-X
Electronic positioning system for horizontal cutting EPS-Y
Automatic saw beam locking with interface recognition
Automatic tilting of the saw unit in vertical or horizontal cutting position
Automatic insertion and removal of the saw unit
Automatic panel end recognition
Automatic movement of the riving knife
Infinitely variable feed speed 10-25 m/min
Selectable sawing cycle
Pneumatic clutch for easy changeover to manual operation
Operating time counter
Tool database
ALU centre support over the entire machine length
ProLock Easy-Fix tool clamping system
Light curtain monitors the danger zone of the 4D and ensures a high level of safety during operation
UPS 24VDC for Touch-PC (UPS uninterruptible power supply)
Integrated, especially powerful TRK dust extraction. Dust limit value around 1 mg/m³
Super-silent noise insulation

Options and Accessories

Panel lowering device

PAV

Ensures a secure grip and automatically controlled vertical transport of the workpiece by the STRIEBIG 4D.

Ex works option – cannot be retrofitted.

Programmable panel feeder

PPS

Ensures secure horizontal transport of the workpiece through the STRIEBIG 4D and positions it with an accuracy of 1/10 mm.

Ex works option – cannot be retrofitted.

STRIEBIG ExpertCut 4D

The 'professional' version for the STRIEBIG 4D

Transfer parts lists from standard ERP or CAD systems and optimise them with the STRIEBIG cutting optimisation software directly at your office workstation. You can also process and manage order, material and parts lists with the program.

The scope of supply includes:

Electronic positioning system EPS-X
Automatic saw beam positioning ASP
Software package (operator guidance with STRIEBIG ExpertCut 4D)
Software license for 1 office workstation (network license)
Label printer
Connection option for network connection via LAN
Operating instructions
Paper holder

LEARN MORE

Ex works option – cannot be retrofitted.

STRIEBIG BaseCut 4D

The 'light' version for the STRIEBIG 4D

You create simple parts lists and automatically and easily optimise the cutting directly the 12" touch screen panel of your STRIEBIG 4D. The intelligent visualisation on the touch screen guides the operator through the cutting process, step by step.

The scope of supply includes:

Electronic positioning system EPS-X
Automatic saw beam positioning ASP
Software package (operator guidance with STRIEBIG BaseCut 4D)
Label printer
Connection option for network connection via LAN
Operating instructions
Paper holder

LEARN MORE

Ex works option – cannot be retrofitted.

Increased cutting depth STRIEBIG 4D

EST 105 mm or EST 130 mm

With this option you benefit from a higher cutting depth of 105 mm or 130 mm.

Ex works option – cannot be retrofitted.

Electronic positioning system

EPS-X (horizontal axis for vertical cuts)

Simply type in the position for the vertical cut and position it automatically. Done.

Part of the equipment package Base- and ExpertCut

Ex works option – cannot be retrofitted.

Scoring saw unit

VSA

Saving time, costs and tools: The scoring saw unit produces even better cutting quality for coated panels.

Angle cutting unit

WSG

Our angle cutting device ensures that the set dimension is maintained accurately in all angle settings.

Paper holder

The paper holder keeps all work documents within easy reach directly on the touch screen panel.

Part of the equipment package Base- and ExpertCut

Small workpiece support, aluminium

(2 elements)

Secure support for small workpieces in the area of the central support.

Cannot be used in combination with equipment package Base- and ExpertCut

Grooving accessory for composite panels and adjustable grooving tools

NVV

Routing of wood materials and composite panels on the 4D is easy with the appropriate additional equipment.

Ex works option – cannot be retrofitted.

Reversible carbide tip profile cutter for composite panels

WPL

The STRIEBIG carbide profile milling cutters are available in three versions: U-shaped, 90° and 135°. They are specially designed for use on STRIEBIG panel saws and provide optimum results when grooving composite panels.

Reversible carbide tips for adjustable grooving tools for grooving work

WPL

The original STRIEBIG adjustable grooving tool (8 – 15 mm groove width) enables maximum efficiency of operation with short retooling times.

Two-speed saw motor

4 kW (incl. Pro Lock Easy-Fix)

Lower cutting speeds are required when working with some materials.A two-speed saw motor can be installed for this purpose.

Ex works option – cannot be retrofitted.

Saw motor with infinitely variable speed

900 - 5000 rpm

When working with some materials it must be possible to adjust cutting speeds variably. A saw motor with infinitely variable speed can be installed for this purpose.

Ex works option – cannot be retrofitted.

Increased feed speed

0.1 - 25 m/min

The current feed rate is shown in the display. It can be called up and changed via the menu.

Ex works option – cannot be retrofitted.

Provide machine data

I 4.0 ready

With this accessory, relevant machine data such as machine running time, engine hours, mains hours, date, time and status are written to a .csv file. This data is available to higher-level systems (not included in the scope of delivery) for evaluation in real time.

Provide production and machine data

I 4.0 ready

Only in combination with the ExpertCut option can production data such as the number of parts to be produced, number of cutting plans, number of finished cut parts, number of open parts, a part ID per element, as well as date, time and status be written to a .csv file together with the other machine data. This data is available to higher-level systems (not included in the scope of delivery) for evaluation in real time.

Safety shut-off mat

Type 6…

If space is limited, a shut-off mat can be installed in the range of the panel positioning systems instead of the safety light curtain.

Ex works option – cannot be retrofitted.

Set for free-standing assembly

Our set with free-standing supports for floor mounting.

Cutting height limit of Y-axis

The cutting height in the Y-axis can be reduced, e.g. if the room height is limited. This requires precise clarification on site by your Striebig sales partner.

Ex works option – cannot be retrofitted.

Special voltage

The saw motors and controls can be designed for country-specific operating voltages.

Ex works option – cannot be retrofitted.

Tropical insulation

For tropical regions, the saw motor can be equipped with a special insulation against higher humidity and protection against damage by termites.

Ex works option – cannot be retrofitted.

Benefits

The original in vertical sawing technology

STRIEBIG – the original in vertical sawing technology. Invented by our company founder and pioneer Ludwig Striebig, it is the ideal combination of precision and economy. In many fields of application, STRIEBIG panel saws are the only possible cost-effective and space-saving solution for panel cutting.

More than

49.500

STRIEBIG vertical panel saws produced

Average of

15.400

operating hours per STRIEBIG life cycle

Cutting capacity of more than

1.000.000

sawn parts per STRIEBIG life cycle

STRIEBIG panel saws: maximum quality and durability

The saw frame

Self-supporting, welded and rigid, the saw frame of the STRIEBIG panel saw guarantees you many years of cutting precision and a high-level of investment security.

The saw beam

Its steel construction is particularly stable and durable. The twin interlocking mechanism ensures perfect angle accuracy and cutting precision for many, many saw cuts.

The sawing device

The sawing device of the STRIEBIG saw is robustly mounted and always runs with a strong drive. A backlash-free and smooth-running guide ensures easy and precise
working.

Minimum space requirement

In contrast to a horizontal panel-sizing saw, the vertical STRIEBIG panel saw only requires about half the space. The area of a STRIEBIG including space in front of the machine for handling and feeding the panels is approximately 24 m². A horizontal panel saw with a cutting range of 3300x3300 mm requires about 60 m including space for handling and feeding the panels². If you also consider the advantage that panels up to 5300 mm in length can already be processed on a STRIEBIG in standard size, the vertical sawing technology shows its “space advantage” even more clearly.

Optimal value for money

Compared to other vertical panel saws, STRIEBIG saws already offer many accessories in the basic equipment. From the simple, hand-guided STRIEBIG to the high-end sawing centre with continuous data flow in production, the variety of vertical cutting technology is convincing in the various application areas of wood, plastic and composite panel processing. Low space requirement costs, low maintenance and service costs, as well as a high value retention of the investment further contribute to the optimal value for money of STRIEBIG panel saws.

Convincing customer satisfaction

Thanks to our decades-long leading market position, we have been able to continuously expand our customer base and enjoy above-average customer satisfaction. In cooperation with users and specialist trade partners, we are constantly further developing our machines. Thus our customers continuously benefit from more advantages of vertical sawing technology.

Produced in-house, Swiss-made in Lucerne

With enthusiasm and passion, the team at Striebig AG develops and produces the Swiss-made vertical panel saws at the production plant in Lucerne. We always keep an eye on the overall economic and ecological context of our activities. Our entire company is certified for its management systems in the areas of quality, environment, occupational health and safety and health protection.

Video

Images

Specs

Weight of the saw	ca 1.300 kg
Cutting depth	80 mm
Saw motor power	5,5 kW (7,5 HP)
Saw blade diameter	300 mm
Saw blade bore	30 mm *¹
Emission sound pressure level at the workplace L_pA	83 dB *²
Saw blade speed	4800 U/min
Panel lowering device (PAV)	2 PA units (opt. 3^rd PA unit)
Max. panel weight per PA unit	80 kg
Max. panel thickness in clamping unit	60 mm
Feed rate of PAV under load	5 m/min
Feed rate of PAV without load	10 m/min
1 extraction connection	ø 140 mm
Compressed air connection	6-10 bar
Wattage	7,5 kW
Mains connection	3 x 400 V / 50 Hz

*1 with two side bores ∅ 9 mm, radius 30 mm
*2 Measurement standards and emission values according to EN 1870-14, measurement uncertainty allowance K = 4 dB (A).
(All data refer to EDITION 60 Type 6224.)

For all machines:
Powerful TRK dust extraction significantly below 2 mg/m³. The system used must have an extraction performance of 20 m/s in order to meet the TRK specifications. (Vacuum approx. 1400 Pa. / COMPACT approx. 1470 Pa) at the connector in order to meet the TRK specifications.

Technical note:
Permissible ambient temperature min: + 5 °C / max. + 40 °Celsius
Relative humidity: 19 - 95% without condensation
In case of mains fluctuations greater than +/- 10% of the nominal voltage, a voltage stabiliser must be installed at the place of use.

The technical specifications are approximate values.
We reserve the right to make changes due to further developments.