The STRIEBIG STANDARD – the proven universal class
Tried and tested over decades, it can almost be considered the Volkswagen Beetle of the vertical panel saw sector: This is the STRIEBIG STANDARD. For many years it has been setting the standard in the universal class for vertical sawing. Thanks to its flexibility and its expandability, it is an ideal panel saw for companies of all sizes.
We offer the STANDARD in two versions
If you have questions, or would like more information, please fill out our contact form.
With automatically yielding aluminium slatted frame.
Highlights of the STRIEBIG STANDARD
Experience, ability, precision
It keeps on going and going – in countless companies. Day after day, metre after metre, the STRIEBIG STANDARD saws a wide variety of panel materials. Utmost precision, accurate cuts with perfect edges every time.
Universal class for all applications
Universally applicable for a wide range of panel materials: Whether chipboard, OSB, MDF, acrylic glass, composite or plastic panels, the STRANDARD can be used to precisely cut various materials.
Durability and stability for decades of sizing cuts
Self-supporting, welded and equipped with hardened guides – these have always been the distinguishing features of the STANDARD's saw frame.
This frame, the heart of every STRIEBIG panel saw, has been continuously improved over the years.
The absolute parallelism between the upper guide rail and the centre and roller support ensures cutting precision for many years.
Clean air in abundance
We are aware of the high susceptibility to dust in many companies.
Therefore, the STANDARD is available in two different TRK versions. With the integrated TRK dust extraction system we achieve dust limits of well below 1 mg/m3 (TRK1). This means that we fall below the valid TRK guideline values by more than 50%.
Standard Equipment
Comprehensive standard equipment
Solid, self-supporting, welded, rigid saw frame
Sturdy, durable saw beam steel construction
Robust bearing of the motor carriage ensures high cutting precision
Powerful, high-torque 5.5 kW motor (7.5 HP)
TRK dust extraction
Model TRK 1 with automatically yielding wooden support wall
Model TRK 2 with automatically yielding aluminium slatted frame and plastic supports
Device for wall mounting
17-fold roller support with 3 brake pedals (model 6224)
Strip cutting gauge for repeat cuts
Program cam button for recurring dimensions
Small workpiece support made of aluminium
Super-silent noise insulation to reduce saw blade noise
Mechanical motor brake
Options and Accessories
STRIEBIG OptiDivide cutting optimisation
The retrofittable version
OptiDivide ensures a higher degree of automation in panel cutting. The system works independently of the machine control. It can be retrofitted to many STRIEBIG models.
The scope of supply includes:
Compact aluminum housing with integrated 12" touch screen panel
label printer (installed and protected in the housing, operated by means of a drawer)
Always the right dimension thanks to the digital measuring system DMS for the X-axis: The display accuracy can be freely selected between 0.1/0.5 and 1.0 mm.
Digital measuring system
DMS-Y (vertical axis for horizontal cuts)
The digital measuring system DMS for the Y-axis ensures correct dimensions at all times. Freely selectable display accuracy between 0.1/0.5 and 1.0 mm.
Angle cutting unit
WSG
The STRIEBIG angle cutting device guarantees exact adherence to the set dimension in all angle settings.
Paper holder
The paper holder keeps the work documents within easy reach directly at the saw.
Pneumatically braked support rollers
Instead of the mechanical roller brake with foot pedal actuation, a pneumatic brake system for the support rollers can be installed. The brake is activated as soon as the sawing unit is in the plunged position and is released again when the sawing unit is fully withdrawn. The system requires a compressed air connection of 6 - 10 bar.
Ex works option – cannot be retrofitted.
Small workpiece support, aluminium
(2 elements)
Secure support for small workpieces in the area of the central support.
Small workpiece support, wood
Option for model TRK 1 and TRK 2
The small workpiece support made of wood is particularly suitable for cutting smaller cut material. It can be used with model TRK 1 as well as model TRK 2.
Ex works option – cannot be retrofitted.
High-end frames made of synthetic materials
Used for the processing of particularly difficult panel coatings.
Grooving accessory for composite panels
NVP
Grooving or routing of composite panels on the STANDARD is easy with the appropriate additional equipment.
Reversible carbide tip profile cutter for composite panels
WPL
The STRIEBIG carbide profile cutters are available in three versions, U-shaped, 90° and 135°. They are specially designed for use on STRIEBIG panel saws and deliver optimum results when grooving composite panels.
Depth stop for adjustable grooving tools
TVN
Wood materials can easily be grooved on the STANDARD with the depth stop and the appropriate insert adjustment groover (not included in the scope of delivery).
Reversible carbide tips for adjustable grooving tools for grooving work
WPL
The original STRIEBIG adjustable grooving tool (8 – 15 mm groove width) enables maximum efficiency of operation with short retooling times.
Operating time counter
Shows the exact working and running times of the STANDARD.
Ex works option – cannot be retrofitted.
Set for free-standing assembly
Set with free-standing supports for floor mounting.
Horizontal separation of the frame
Optionally, the saw frame can be produced horizontally and separately. This results in smaller transport units, which is especially useful when access to the installation site is difficult.
Ex works option – cannot be retrofitted.
Cutting height limit of Y-axis
The cutting height in the Y-axis can be reduced, e.g. if the room height is limited. A precise clarification on site by your STRIEBIG sales partner is necessary for this.
Ex works option – cannot be retrofitted.
Special voltage
The saw motors and controls can be built for country-specific operating voltages.
Ex works option – cannot be retrofitted.
Tropical insulation
For tropical regions, the saw motor can be equipped with a special insulation against higher humidity and protection against damage by termites.
Ex works option – cannot be retrofitted.
Benefits
The original in vertical sawing technology
STRIEBIG – the original in vertical sawing technology. Invented by our company founder and pioneer Ludwig Striebig, it is the ideal combination of precision and economy. In many fields of application, STRIEBIG panel saws are the only possible cost-effective and space-saving solution for panel cutting.
More than
49.500
STRIEBIG vertical panel saws produced
Average of
15.400
operating hours per STRIEBIG life cycle
Cutting capacity of more than
1.000.000
sawn parts per STRIEBIG life cycle
STRIEBIG panel saws: maximum quality and durability
The saw frame
Self-supporting, welded and rigid, the saw frame of the STRIEBIG panel saw guarantees you many years of cutting precision and a high-level of investment security.
The saw beam
Its steel construction is particularly stable and durable. The twin interlocking mechanism ensures perfect angle accuracy and cutting precision for many, many saw cuts.
The sawing device
The sawing device of the STRIEBIG saw is robustly mounted and always runs with a strong drive. A backlash-free and smooth-running guide ensures easy and precise working.
Minimum space requirement
In contrast to a horizontal panel-sizing saw, the vertical STRIEBIG panel saw only requires about half the space. The area of a STRIEBIG including space in front of the machine for handling and feeding the panels is approximately 24 m2. A horizontal panel saw with a cutting range of 3300x3300 mm requires about 60 m including space for handling and feeding the panels2. If you also consider the advantage that panels up to 5300 mm in length can already be processed on a STRIEBIG in standard size, the vertical sawing technology shows its “space advantage” even more clearly.
Optimal value for money
Compared to other vertical panel saws, STRIEBIG saws already offer many accessories in the basic equipment. From the simple, hand-guided STRIEBIG to the high-end sawing centre with continuous data flow in production, the variety of vertical cutting technology is convincing in the various application areas of wood, plastic and composite panel processing. Low space requirement costs, low maintenance and service costs, as well as a high value retention of the investment further contribute to the optimal value for money of STRIEBIG panel saws.
Convincing customer satisfaction
Thanks to our decades-long leading market position, we have been able to continuously expand our customer base and enjoy above-average customer satisfaction. In cooperation with users and specialist trade partners, we are constantly further developing our machines. Thus our customers continuously benefit from more advantages of vertical sawing technology.
Produced in-house, Swiss-made in Lucerne
With enthusiasm and passion, the team at Striebig AG develops and produces the Swiss-made vertical panel saws at the production plant in Lucerne. We always keep an eye on the overall economic and ecological context of our activities. Our entire company is certified for its management systems in the areas of quality, environment, occupational health and safety and health protection.
Video
Images
Specs
Weight of the saw
approx. 1.100 kg
Cutting depth
80 mm
Saw motor power
5.5 kW (7.5 HP)
Saw blade diameter
300 mm
Saw blade bore
30 mm *1
Emission sound pressure level at the workplace LpA
79 dB *2
Saw blade speed
4750 rpm
1 extraction connection
ø 140 mm
Compressed air connection
6-10 bar *3
Wattage
7.5 kW
Mains connection
3 x 400 V / 50 Hz
*1 with 2 side holes Ø 9 mm, radius 30 mm · *2 measurement standards and emission values in accordance with EN 1870-14, measurement uncertainty allowance K = 4 dB (A). *3 Compressed air connection only required for pneumatically braked support rollers option (all data refers to STANDARD Type 6224)
For all machines: Powerful TRK dust extraction significantly below 2 mg/m3. The system used must have an extraction performance of 20 m/s in order to meet the TRK specifications. (Vacuum approx. 1400 Pa. / COMPACT approx. 1470 Pa) at the connector in order to meet the TRK specifications.
Technical note: Permissible ambient temperature min: + 5 °C / max. + 40 °C Relative humidity: 19 - 95% without condensation In case of mains fluctuations greater than +/- 10% of the nominal voltage, a voltage stabiliser must be installed at the place of use.
The technical specifications are approximate values. We reserve the right to make changes due to further developments.
The paper holder keeps the work documents within easy reach directly at the saw.
