Technomelt Dorus HKP20 Hot Melt Glue Cartridge, Clear (EVA, unfilled) (HKP20-CL-CT)
Technomelt DORUS HKP 20 - Clear EVA, Unfilled Hotmelt Adhesive for Edgebanding
Cartridge for HolzHer Edgebander, Unfilled
Characteristics
• Universal hotmelt adhesive
• Fast melting
• Very good wetting
• High glue mileage
• Produces tight joints virtually not visible
• High final bond strength
• Very high heat resistance
Fields of application
• Edgebanding in HolzHer cartridge equipment as from feedrates of 10 m/min
• Edging material: solid wood, veneer, melamine, polyester, HPL*, PVC*, ABS*, PP*
*Suitability depends on the individual characteristics of the edging material and how it is primed.
• Particularly suitable for solid wood
Technical data
Softening point (Ring & Ball): approx. 110 °C (230 °F)
Viscosity (Brookfield): approx. 75 000 mPa·s / 200 °C (392 °F)
Heat resistance: approx. 90 °C (194 °F)
tested with 0.6 mm oak veneer using the DORUS method of increasing temperature
Instructions for use
Material and room temperature: minimum 18 °C (64 °F)
Material moisture: 8 - 12 %
Heating time: 2 - 4 min
*For use in Holz-Her machines you'll need to turn down the air pressure to 3 bar. For use in glue pot machines you'll need to turn down the flow gate. This is an unfilled product and requires less glue to adhear the edgebanding.
Recommended working temperature
in the application nozzle: 200 - 220 °C (392 - 428 °F)
